Installation & User Guides

General Information

Gliderol Maintenance & Cleaning Guide

Gliderol Roller Doors

Glidermatic GRD+ Owners Manual & Install Instructions

G+ Control Box Manual

Residential (Series A) Roller Door Install Instructions

Industrial & Large Residential (Series B) Roller Door Install Instructions

Gliderol Sectional Doors

GTS+ Owners Manual & Install Instructions

GTS+ Optima Owners Manual & Install Instructions

Panel-Glide Sectional Overhead Door Install Instructions

Safe-T-Glide & Insul-Glide Install Instructions

Manual Operation Guides

Gliderol Roller Doors

Glidermatic GRD™ Manual Operation Guide – Roller Doors (year 2000 – 2013)
This explains how to put your Glidermatic GRD operator into manual operation mode during a power outage or whilst you are experiencing issues with your operator, allowing you to remove vehicles trapped inside the garage.

Glidermatic GRD+ Manual Operation Guide – Roller Doors (year 2014 – current)
This explains how to put your Glidermatic GRD+ operator into manual operation mode during a power outage or whilst you are experiencing issues with your operator, allowing you to remove vehicles trapped inside the garage.

Gliderol Sectional Doors

Glidermatic GTS & GTS Optima Tilt and Sectional Door Automatic Operator – (2000 – 2013)
This explains how to put your Glidermatic GTS or Glidermatic Optima operator into manual operation mode during a power outage or whilst you are experiencing issues with your operator, allowing you to remove vehicles trapped inside the garage.

Glidermatic GTS+ Tilt and Sectional Door Automatic Operator – (2014 – current)
This explains how to put your Glidermatic GTS+ operator into manual operation mode during a power outage or whilst you are experiencing issues with your operator, allowing you to remove vehicles trapped inside the garage.

Setting Door Travel Limits

Gliderol Roller Doors

Glidermatic GRD™ Door Travel Adjustment – Roller Doors (year 2000 – 2013)
This explains how to adjust both top and bottom travel limits for a roller door with a Glidermatic GRD operator

Glidermatic GRD+ Door Travel Adjustment – Roller Doors (year 2014 – current)
These instructions demonstrate how to set the travel limits of your Gliderol Roller door. This communicates to the operator the specific distance it must travel to complete an open/close cycle.

Gliderol Sectional Doors

GTS Tilt and Sectional Door Automatic Operator – (Pre-year 2000)
This refers to setting or adjusting top and bottom limits of a Panel•Glide Sectional Overhead door fitted
with an old GTS operator

GTS 2000™ Tilt and Sectional Door Automatic Operator (year 2000 – 2010)
This explains how to adjust both top and bottom travel limits for a Panel•Glide Sectional Overhead door operated by a GTS 2000 automatic operator (2000-2010)

GTS 2000™ Tilt and Sectional Door Automatic Operator (year 2010 – 2013)
This explains how to adjust both top and bottom travel limits for a Panel•Glide Sectional Overhead door operated by a GTS 2000 automatic operator (2010-2013)

Glidermatic GTS+ Tilt and Sectional Door Automatic Operator – (year 2014 – current)
This explains how to adjust both top and bottom travel limits for a Panel•Glide Sectional Overhead door operated by a Glidermatic GTS+ automatic operator (2014-current)

Glidermatic GTS+ Optima Tilt and Sectional Door Automatic Operator – (year 2014 – current)
This explains how to adjust both top and bottom travel limits for a Panel•Glide Sectional Overhead door operated by a Glidermatic GTS+ Optima automatic operator (2014-current)

Handset Programming Information

Gliderol Roller Doors

Glidermatic GRD Automatic Roller Door Operator – Roller Doors (year 2000 – 2014)
These instructions demonstrate how to program a new or additional Gliderol handset to suit
your existing Glidermatic GRD roller door operator (TM305C transmitter from year 2014 onwards)

Glidermatic GRD+ Automatic Roller Door Operator – Roller Doors (year 2014 – current)
These instructions demonstrate how to program a new or additional Gliderol handset to suit
your existing Glidermatic GRD+ roller door operator (TM390+ transmitter from year 2014 onwards)

Glidermatic GRD+ Handset Key Settings – Roller Doors (year 2014 – current)
These instructions demonstrate how to program or change the key settings on your Gliderol
handset, allowing you to select the specific button that operates your door (TM390+ transmitter)

Gliderol Sectional Doors

GTS 2000™ Tilt and Sectional Door Automatic Operator – Panel•Glides (prior to 2000)
This explains how to program a handset to the receiver for a Panel•Glide door operator (TM305C transmitter from prior to year 2000)

GTS 2000™ Tilt and Sectional Door Automatic Operator – Panel•Glides (year 2000 – 2013)
This explains how to program a handset to the receiver for a Panel•Glide door operator (TM305C transmitter from year 2000 – 2013)

Glidermatic GTS+ Tilt and Sectional Door Automatic Operator – Panel•Glides (year 2014 – current)
These instructions demonstrate how to program a new or additional Gliderol handset to suit
your existing Glidermatic GTS+ garage door operator (TM390+ transmitter from year 2014 onwards)

Glidermatic GTS+ Optima Tilt and Sectional Door Automatic Operator – Panel•Glides (year 2014 – current)
These instructions demonstrate how to program a new or additional Gliderol handset to suit
your existing Glidermatic GTS+ Optima garage door operator (TM390+ transmitter from year 2014 onwards)

Glidermatic GTS+ Handset Key Settings – Panel•Glides (year 2014 – current)
These instructions demonstrate how to program or change the key settings on your Gliderol
handset, allowing you to select the specific button that operates your door (TM390+ transmitter)

Obsolete Operators

Gliderol TM-27 Handset (Old operator)
This refers to programming a Gliderol TM-27 handset (both trinary & binary units)

Stand Alone Receiver (Old operator / other make operators)
This refers to programming a Gliderol handset to a stand-alone receiver for ANY make door or operator

GTX U3
Explains the programming of a GTX U3 handset to the receiver

GTX U1
This refers to the programming of a GTX U1 handset to the receiver